TR16 MBR 308WH

The replica belongs to the highest category of G&G Advanced. It has a high quality all-metal chassis that delivers robustness and durability. Thanks to the Crane LMT plastic collapsible stock, you adjust the length exactly for you – it can be set in six positions. Here also, when the button is pressed and the rubber foot is tilted to the side, is space for the battery. For reliable operation of the replica, the manufacturer recommends a rechargeable battery of at least 9.6V NiMH, ideally 11.1V Li-Po (type MiniCQB). The replica has a classic Mini-Tamyia connector. Additionally, there is a storage compartment in the stock support, where you can insert, for example, replacement batteries into the flashlight.

The metal upper and metal bottom parts of the VLTOR style body are top-stitched. There are no burrs or traces of casting. The grip and the magazine are an ergonomically shaped rubber grip for better grip. You can find other nice enhancements on the body of the gun – the two-sided fire selector and magazine release. By pulling the charging handle, which is lightweight with a latch and looks really luxurious, you open the dust cap of the bolt. Here is a default access for hop-up settings. The improvement is that you do not have to hold the charging handle for the hop-up setting yet – the metal-immitting bolt remains locked in the open position and the hop-up space is so loose. The bolt release is on the left.

On the upper part of the weapon is a standard RIS with folding sights for installation of optics / red dot and other equipment. The bottom part of the body is laser-labeled with the manufacturer’s logo and a unique serial number.

The power of the weapon is about 125m/s (410 FPS). Suitable ammunition is 0,25g BBs.

Overall, external processing and materials are at a very high level. But the performance of the G&G TR 16 does not stop. On the contrary, that important is hidden inside …

G2 System – the mechabox of the future
Inside the gun is a completely new and improved metal gearbox G2 with 8mm ball bearings, steel gears and M120 spring. Additionally equipped with electronics – a mosfet located in the stock tube and G2 ETU (Electronic trigger unit) in the gearbox. Internal trigger contacts with electronic microswitches.

70% reinforcement of the gearbox frame in the most stressed parts
Quick change spring
Double seals on cylinder head and nozzle for higher performance
Double-sided fire selector and release of the magazine for faster operation
Disconnecting the motor in the case of removed or empty magazine
Improved oblique gears for higher performance, lower heating and power consumption.

MOSFET reduced by 50% for greater space in the stock tube
Improved ETU (Electronic trigger unit) for a more sensitive trigger and to prevent triggering of the trigger
BURST mode option – 3 or 5 shots
Acoustic signaling of low battery voltage and gearbox faults

Features

Velocity Feet Per Second (FPS): 330
Rounds Per Minute (RPM): 1000
Gearbox Version (GBV): 2
Min Length: 870mm
Max Length: 960mm
Weight (with Magazine): 3750g
Inner Barrel Length: 400mm
Thread Type: 14mm CCW

Gen2 MOSFET
Gen2 Electronic Trigger Unit
3 Round Burst Mode
Mag Out Cut Off (When used with G2 mags.)
Enhanced Feed Finger
Enhanced Speed Trigger
Rotary Hop Chamber
Ambidextrous Selector
Ambidextrous Sling Point
Ambidextrous Mag Release
Working Bolt Release Catch
Flip Up Sights
KeyMod Rail Set
Ergonomic Grip
6 Position Sliding Stock